Small adjustments & sanding

Before sanding the hull, I decided to improve the wide tolerances I created on the stern and hull planking.
I started with cutting a (straight) line in the planking at the stern.

And removed the wood carefully so I could insert a new strip of sapelli

After sanding, visually less tolerances

After this I started roughly shaping the hull with grid 60

And grid 100, grid 150, grid 240 and finished the hull with grid 400.

On the pictures down below I gave ½ the hull bees wax (color “blonde”) and on these you will notice immediately the warm glow of Sapelli wood taking over the picture.